How to Make Golf Cart Seat Covers Out of Towels?

How to Make Golf Cart Seat Covers Out of Towels

Golf cart seat covers are a great way to add a bit of flair to your ride. If you want to stretch the life of your seat covers, or you’re looking to change the look of your golf cart, try making your seat covers out of towels. It’s a great way to give your golf cart a customized look.

Golf cart seat covers can be expensive. One way to make them that can take as little as an hour is to cut up an old towel and sew it together.

Most people don’t think to do this, but it’s a great way to keep your seats clean and dry.

So in this article, I will explain the whole process of making golf cart seat covers out of towels.

What is a Golf Cart Seat Covers Out Of Towels?

A golf cart seat covers out of towels is a great way to keep your golf cart clean and dry. These covers are easy to put on and take off, protecting your seats from dirt, dust, and rain. You can also use these covers to protect your golf cart from the sun.

How to Make Golf Cart Seat Covers Out of Towels Step By Step Process

Step 1: Gather Your Supplies

  • A white sheet or any other light-colored surface
  • A flat, smooth surface to trace onto
  • A black marker or crayon
  • A transparent plastic sheet or poster board
  • Paint or a drawing medium of your choice

You will need a few supplies to make your own golf cart seat covers. Towels are the most common, but any large, absorbent piece of fabric will work. It would help if you also had some scissors, a sewing machine or needle and thread, and a hot glue gun or similar adhesive.

To make the covers themselves:

  1. Lay one towel out flat on your work surface.
  2. Place the other towel over it so that the edges overlap.
  3. Pin the towels together along one edge, then sew them together using a seam allowance of about 1/2 inch (1 cm).
  4. Repeat to create the second cover.

Once you have sewn the covers together, turn them inside out to cover them in reverse side fabric. Now it is time to apply your adhesive.

Step 2: Cut the Towels into Stripes

Assuming you have a golf cart, the first step is to measure the towel length you need. For each stripe, cut the towel about 1 inch wider than the width of your golf cart seat. For example, if your golf cart’s seat is 18 inches wide, you would cut your towels at 24 inches wide.

Next, fold each strip in half to measure 8 inches by 2 inches. Finally, use a seam ripper or a sharp knife to cut 1-inch holes along both long edges of each folded strip. This will create your golf cart seat cover!

Step 3: Sew the Stripes Together

Towels make great seat covers for golf carts. They are easy to sew together and can be made in any color or style you want.

Lay the towels out on a flat surface and start sewing the strips together. You can use a straight stitch or a zigzag stitch to sew the strips together.

After sewn all of the stripes together, hem the edge of the towel cover with a serger or hemming machine.

There you have it! You have made your very own golf cart seat covers out of towels. Enjoy your new seat cover!

Step 4: Add Reinforcement Material (I Used Vinyl)

Adding reinforcement material, such as vinyl, to golf cart seat covers will help them last longer and withstand more wear and tear.

 Vinyl is a durable material that can stand up to abuse, so it’s a good choice if you want your seat covers to last long.

To add reinforcement material to your golf cart seat covers, first, measure the width of the vinyl that you want to use. Then, cut the vinyl to this width using a sharp knife or scissors.

Next, fold the vinyl strip in half to measure 1 inch by 12 inches.

Finally, use a seam ripper or a sharp knife to cut 1-inch holes along both long edges of each folded strip. This will create your golf cart seat cover!

Step 5: Sew on the Logo or Design of Your Choice

The golf cart seat covers can be made out of any towel, preferably a thick one, to be durable and waterproof.

First, measure the width and length of the towel you want to use. Then cut the towel into two equal strips.

Next, fold each strip in half, so they are equal in length, and sew down the middle of each strip.

Make sure to leave a couple of inches open at either end so that you can turn the cover inside out when it is finished.

Once the cover is sewn together, turn it inside out so that the stitched seams are on the inside, and then tuck away any excess fabric.

Step 6: Assemble the Golf Cart Seat Covers

Assemble the Golf Cart Seat Covers

To assemble the golf cart seat covers, take one of the strips and measure its width. This is how wide you will need to cut the other strip to make a double-wide cover.

Then, take the second strip and measure its length. This is how long you will need to cut the first strip to make a single-wide cover.

Finally, use these two pieces of fabric as a template to cut out two identical covers using your scissors.

Then, use your sewing machine to sew these covers together along their long edges, making sure that they are double-woven and extra durable.

Step 7: Enjoy Your New Golf Cart Seat Covers!

Enjoy Your New Golf Cart Seat Covers!

These golf cart seat covers are perfect for keeping your seats clean and protected from the sun and rain. They are made from high-quality, absorbent towels and are easy to install.

These covers will keep your seats clean and free of dirt or dust. So, why wait? Get your golf cart seat covers today!

Check Also: How To Make A Golf Cart Seat Blanket For A Cozy Day Out

Benefits of a Golf Cart Seat Covers Out Of Towels

A golf cart seat covers out of towels offers many benefits. They are easy to install, affordable, and provide a custom look for your golf cart. Installation is simple and only takes a few minutes.

Golf cart seat covers out of towels are also affordable and can be purchased in bulk. They provide a custom look and additional protection for your golf cart seats.

  1. Keeps your car clean and free of dirt and dust.
  2. Keeps your car cooler in the summer.
  3. Keeps your car cleaner in the winter.
  4. Protects your car’s leather seats from wear and tear.
  5. Protects your car’s interior from UV damage.

Check Also: Trick Your Golf Cart.

The difficulty of a Golf Cart Seat Covers Out Of Towels.

There is a difficulty in making Golf Cart Seat Covers Out Of Towels.

  1. It is difficult to remove a golf cart seat cover from a towel.
  2. The towel can quickly become saturated with water, and the cover becomes stuck on the towel.
  3. The towel can also become soiled with golf cart dirt and oil, making it difficult to remove the cover.
  4. If the seat cover is not removed correctly, it can tear or fray, leaving a hole in the body.

FAQs About How to Make Golf Cart Seat Covers Out of Towels

What is the best material for golf cart seat covers out of towels?

Some possible materials for golf cart seat cover out of towels could be cotton, linen, or a synthetic material.

Do you have an old towel that you don’t know how to reuse?

You can reuse an old towel to make golf cart seat covers if you have an old towel. Cut the towel into a small square, about 18 inches by 18 inches. Sew the bottom of one corner of the towel to the top of the opposite corner. Then sew up each side of the square.

Conclusion

We hope you enjoyed our post on making golf cart seat covers out of towels. In today’s world, golf carts are used for various things, but they’re still associated with golfing.

We hope that by reading this blog, you’ll be able to create some golf cart seat covers for your golf cart or your friends, family, or other golf cart enthusiasts! If you have any questions about making golf cart seat covers, please don’t hesitate to ask.

Leave a Comment

Your email address will not be published.